Moxa Technologies EtherDevice Manuel d'utilisateur télécharger pdf (Page 83)

EDS-508 Series User’s Manual EDS Configurator GUI

4-7

3. The Setup Configuration window will be displayed, with a special note attached at the

bottom. Parameters that have been changed will be activated with a check mark. You may

make more changes if necessary, and then click OK to accept.

4. Click on Yes in response to the following warning message to accept the new settings.

Unlock Server

The Unlock Server function is used to open a password protected Switch so that the user can

modify its configuration, import/export a configuration, etc. To begin with, we point out that there

are six possible responses under the Status column. The Status of a MOXA EtherDevice Switch

indicates how the switch was located (by MOXA EtherDevice Switch Configurator), and what

type of password protection it has.

The six options are as follows (note that the term Fixed is borrowed from the standard fixed IP

address networking terminology):

! Locked

The Switch is password protected, “Broadcast Search” was used to locate it, and the password

has not yet been entered from within the current Configurator session.

! Unlocked

The Switch is password protected, “Broadcast Search” was used to locate it, and the password

has been entered from within the current Configurator session. Henceforth during this

Configurator session, activating various utilities for this Switch will not require re-entering the

server password.

! Blank

EDS is not password protected, and “Broadcast Search” was used to locate it.

1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 91 92

Pas de commentaire

Moxa Technologies EtherDevice Manuel d'utilisateur Page 83