Moxa Technologies EtherDevice Manuel d'utilisateur Page 72
- Page / 92
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
EDS-508 Series User’s Manual Featured Functions
3-56
STEP 2
Be sure to activate your settings before exiting.
• When using the Web Browser interface, activate by clicking on the Activate button.
• When using the Console utility, activate by first highlighting the Activate menu option, and
then press Enter. You should receive the Mirror port settings are now active! (Press any
key to continue) message.
Ping
The Ping function uses the ping command to give users a simple but powerful tool for
troubleshooting network problems. The function’s most unique feature is that even though the
ping command is entered from the user’s PC keyboard, the actual ping command originates from
MOXA EtherDevice Switch itself. In this way, the user can essentially “sit on top of MOXA
EtherDevice Switch” and send ping commands out through its ports.
To use the Ping function, type in the desired IP address, and then press Enter from the Console
utility, or click on Ping when using the Web Browser interface.
Using Monitor
You can monitor statistics in real time from MOXA EtherDevice Switch’s web console and serial
console.
Monitor by Switch
Access the Monitor by selecting “system” from the left selection bar. Monitor by System allows
the user to view a graph that shows the combined data transmission activity of all of MOXA
EtherDevice Switch’s 8 ports. Click on one of the four options—All Packets, TX Packets, RX
Packets, or Error Packets—to view transmission activity of specific types of packets. Recall that
TX Packets are packets sent out from MOXA EtherDevice Switch, RX Packets are packets
received from connected devices, and Error Packets are packets that did not pass TCP/IP’s error
checking algorithm. The All Packets option displays a graph that combines TX, RX, and Error
Packet activity. The four graphs (All Packets, TX Packets, RX Packets, and Error Packets) have
the same form, so we show here only the All Packets graph. The graph displays data transmission
activity by showing Packets/s (i.e., packets per second, or pps) versus sec. (seconds). In fact, three
curves are displayed on the same graph: Uni-cast packets (in red color), Multi-cast packets (in
green color), and Broad-cast packets (in blue color). The graph is updated every few seconds,
allowing the user to analyze data transmission activity in real-time.
- EDS-508 Series 1
- User’s Manual 2
- Table of Contents 3
- Introduction 5
- MOXA EtherDevice™ Switch 6
- Package Checklist 6
- Features 7
- Getting Started 9
- Using the Telnet Console 12
- Using Web Configuration 14
- Featured Functions 17
- Configuring Basic Settings 18
- Password 19
- Accessible IP 20
- Enable/Disable Port 21
- Port Transmission Speed 22
- Port Type 22
- FDX Flow Control 22
- Network 23
- DNS IP Address 24
- Using Port Trunking 28
- Configuring Port Trunking 29
- Using SNMP 30
- Configuring SNMP 31
- SNMP Read/Write Settings 31
- Private MIB information 33
- The Concept of Turbo Ring 33
- Configuring Turbo Ring 37
- The Concept of STP/RSTP 38
- What is STP? 39
- How STP Works 40
- How RSTP Differs from STP 41
- STP Example 42
- Configuring STP/RSTP 43
- Using Traffic Prioritization 46
- QoS Classification 48
- CoS Mapping 50
- TOS/DiffServ Mapping 50
- Using Virtual LAN 51
- The Management VLAN 52
- Communication Between VLANs 52
- Configuring 802.1Q VLAN 54
- Using Multicast Filtering 56
- Multicast Filtering 57
- IGMP Multicast Filtering 58
- Enabling IGMP Snooping 58
- Using Rate Limiting 60
- Configuring Rate Limiting 61
- Using Port Lock 62
- Using Auto Warning 63
- Email Alarm Events Settings 64
- Email Settings 65
- Configuring Relay Warning 66
- Relay Alarm Events Settings 67
- Relay Alarm List 68
- Using Set Device IP 69
- Configuring Set Device IP 70
- Using Diagnosis 71
- Using Monitor 72
- Monitor by Port 73
- Using the MAC Address Table 74
- Using Event Log 75
- EDS Configurator GUI 77
- Starting EDS Configurator 78
- Broadcast Search 78
- Search by IP address 79
- Upgrade Firmware 80
- Modify IP Address 80
- Export Configuration 81
- Import Configuration 82
- Unlock Server 83
- MIB Groups 85
- Specifications 87
- Service Information 89
- MOXA Internet Services 90
- Problem Report Form 91
- MOXA EDS-508 Series 91
- Product Return Procedure 92
Produits connexes et manuels pour Commutateurs de réseau Moxa Technologies EtherDevice
(16 pages)© 2020, manymanuals.fr. Tous droits réservés | 1.410 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels