Moxa Technologies Moxa Smartio C168H Manuel d'utilisateur télécharger pdf (Page 64)

4-6 Smartio C168H/HS User’s Manual

UNIX

Programming the MOXA Ports

The system calls that apply to standard tty port can also be applied to MOXA port

since MOXA port conforms to UNIX tty standard. System calls are like open(),

ioctl(), read(), write(), close(), etc. Please refer to your UNIX Programmer's

Reference manual.

However, these system services only provide limited functions and thus may not

satisfy the sophisticated programmers' need. In order to meet the user's special

purpose, MOXA supports extended services through ioctl() command, which are:

1. MIBUFED (= 0x401) To get byte count in input buffer.

2. MOBUFED (= 0x402) To get byte count in output buffer.

3. MTCRTS (= 0x403) To control RTS output signal.

4. MTCDTR (= 0x404) To control DTR output signal.

5. MLOWATER (= 0x405) To set output buffer low water level.

6. MSTATUS (= 0x407) To read modem line status (CTS/DSR/DCD).

7.MHWFLOW (= 0x40e) To enable/disable the hardware flow control.

The next Section details all the commands.

Extended UNIX Ioctl() Commands

The following lists the syntax of MOXA extended functions for both non-SVR4.x

and SVR4.x UNIX. The variable moxa_fd is the returned file descriptor by open() a

specific MOXA port. For example,

int moxa_fd;

moxa_fd = open(“/dev/ttye11”,O_RDWR);

1. MIBUFED

This function let you know how many bytes queued in input buffer when this

function is issued.

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 101 102

Pas de commentaire

Moxa Technologies Moxa Smartio C168H Manuel d'utilisateur Page 64