Moxa Technologies Moxa Smartio C168H Manuel d'utilisateur télécharger pdf (Page 54)

3-32 Smartio C168H/HS User’s Manual

Tx FIFO Trigger

Tx FIFO sizes from 1 to 16 bytes are available, and the default value is 16 bytes.

RTS/CTS Hardware Flow Control

This feature is for more flexible driver behavior. If set to “Disable” (default), CTS

signal is not needed for tty port to transfer data and RTS/CTS hardware flow control

function in driver is disabled. On the contrary, if set to “

Enable”, CTS signal is

needed for tty port to transfer data and RTS/CTS hardware flow control function in

driver is enabled.

Port Monitoring

This utility gives you a quick view about all the MOXA ports' activities. You can

easily learn each port's total received/transmitted (Rx/Tx) character count since the

time when the monitoring is started. Rx/Tx throughputs per second are also reported

in interval basis (e.g. the last 5 seconds) and in average basis (since the time the

monitoring is started). You can reset all ports' count by <HOME> key. <+> <->

(plus/minus) keys to change the displaying time interval.

Press Enter on the port, that cursor stay, to view the port's communication

parameters, signal status, and input/output queue.

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 101 102

Pas de commentaire

Moxa Technologies Moxa Smartio C168H Manuel d'utilisateur Page 54