Moxa Technologies Moxa Smartio C168H Manuel d'utilisateur télécharger pdf (Page 52)

3-30 Smartio C168H/HS User’s Manual

others it may stand for 7-data-bit, even-parity. So, please examine the “getty

default” file carefully, and make sure the terminal settings is the same. Otherwise,

garbled data will be inevitable.

Advanced Configuration

In the [Advanced configuration] dialog, users can set baud rate mapping, Rx FIFO

trigger level, Tx FIFO trigger level and RTS/CTS hardware flow control.

Baud Rate Mapping

There are two different baud rate tables can be selected: High Band and Low Band.

The highest baud rate for High Band is 921.6K bps, while 38.4K bps for Low Band.

Because of the limit of UNIX termio/termios definition, the highest baud rate label

is B38400 (mapped to 38.4K bps). If users wish to use the baudrate higher than

38.4K bps for MOXA boards, this baud rate will be re-mapped to the lower as

defined in the below baudrate-mapping table:

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 101 102

Pas de commentaire

Moxa Technologies Moxa Smartio C168H Manuel d'utilisateur Page 52