Moxa Technologies NPort Server Pro Guide d'installation télécharger pdf (Page 10)

2-2

LED Indicators

LED COLOR Description

Power Red

Indicates that NPort Server Pro is turned on, and

power is being supplied to the server.

Green

Steady on indicates that NPort Server Pro is

running without problem. Flashing indicates that

the NPort Pro Manager Locate Server function

has located the server.

Ready

Blinking

NPort is requesting an IP address from the

DHCP or BootP server. After receiving the IP,

the LED will stop blinking.

100M Green

Steady on indicates that NPort Server Pro’s

Ethernet connection is running at 100 Mbps.

10M Green

Steady on indicates that NPort Server Pro’s

Ethernet connection is running at 10 Mbps.

Traffic Green

Blinking indicates data are being received from

the Ethernet Interface.

Tx Green

Blinking indicates that data are being sent out

through the serial port.

Rx Orange

Blinking indicates that data are being received

through the serial port.

Note: The number of Tx/Rx LEDs depends on the model you use. For DE-303,

there are 16 Tx/Rx LEDs. For DE-308, there are 8 Tx/Rx LEDs.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 20 21

Pas de commentaire

Moxa Technologies NPort Server Pro Guide d'installation Page 10