Moxa Technologies DE-304 Guide d'installation télécharger pdf (Page 11)

2-3

DIN Rail

NPort Server Lite can also be mounted on a standard 35-mm DIN Rail. First, use

two screws to attach each of the two DIN Rail brackets to the metal attachment

plates (Figs. 2-2a, b).

Figure 2-2a. DIN Rail Mounting Brackets—Inner Placement

Figure 2-2b. DIN Rail Mounting Brackets—Outer Placement

Since the screw heads are beveled, and the holes in the plate are countersunk, the

tops of the screws will be flush with the metal plates. This allows the metal

plates (now with the DIN Rail brackets attached) to be screwed to the bottom of

the server. Use three screws to attach the metal plate to the bottom of NPort

Server Lite, with the orientation as shown in Fig. 2-3a or Fig. 2-3b.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 32 33

Pas de commentaire

Moxa Technologies DE-304 Guide d'installation Page 11