Moxa Technologies 6110 Manuel télécharger pdf (Page 23)

TC-6110 Hardware Hardware Installation

2-13

Step 6: Turn back the tray and fasten the drive to the PCB using the holes indicated below.

Step 7: Fasten four screws on the front.

Step 8: Connect the power cable and SSD/HDD cable with the main board. Reconnect the data and power

interfaces, then complete the installation by fastening the drive tray to the main PCB using the six screws.

Step 9: When finished, insert the storage tray back into the TC-6110 and tighten the external thumbscrews.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 44 45

Pas de commentaire

Moxa Technologies 6110 Manuel Page 23