Moxa Technologies MGate MB3000 Modbus Manuel d'utilisateur télécharger pdf (Page 14)

MGate 4101-MB-PBS UM Hardware

3-7

To reset the MGate to the factory default settings, hold down the reset button for about 5 seconds. The MGate

will restart and be rest to factory default settings.

Rotary Switch

Before communication, you must assign a slave ID to the PROFIBUS slave, If you would like to assign an

address between 0 - 99, you need to change the rotary switch to the desired address. If you would like to assign

an address which is over 99, you must set it in the MGate utility.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 53 54

Pas de commentaire

Moxa Technologies MGate MB3000 Modbus Manuel d'utilisateur Page 14