Moxa Technologies MGate MB3000 Modbus Manuel d'utilisateur télécharger pdf (Page 11)

MGate 4101-MB-PBS UM Hardware

3-4

6 5V

7 N.C.

8 PROFIBUS D-

9 N.C.

Console (RS-232) Pin Assignment

The MGate 4101-MB-PBS series use RJ45 serial port to connect to PC to configure device.

PIN RS-232

1 DTR

2 RTS

3 GND

TXD

5 RXD

6 DCD

7 CTS

8 DTR

Mounting the Unit

The unit can be mounted on the wall or mounted on a DIN-Rail. The MGate 4101-MB-PBS/4101I-MB-PBS series

is designed to be attached to a DIN-Rail or mounted on a wall. For DIN-Rail mounting, push down the spring

and properly attach it to the DIN-Rail until it “snaps” into place. For wall mounting, install the wall mount kit

(optional) first, and then screw the device onto the wall. The following figure illustrates the two mounting

options:

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 53 54

Pas de commentaire

Moxa Technologies MGate MB3000 Modbus Manuel d'utilisateur Page 11