Moxa Technologies NPort Server Pro Manuel d'utilisateur télécharger pdf (Page 61)

Setting Up Multi-Host

NPort Server Pro User’s Manual 5-15

4. Click on Open and then wait until you see an “upgrade completed” message. The

server will restart automatically.

. Note: When using this procedure, only the selected server’s firmware is upgraded. If you

know that new NPort Pro Manager software has been released, it is recommended that

you uninstall the old NPort Pro Manager program from your NT/95/98 host’s hard

drive, and then install the new one.

Configuring Server Properties

The Server Properties function can be used to change the server’s name, password, and transmission

parameters. Choose Server Properties from the Server menu, or click on the toolbar Server

Properties icon to start the function.

Server Properties—General

You may modify the Server Name, Server

IP, and Netmask by using the toolbar

Properties function.

1. Select the General tab in the Server

Properties window.

2. Modify the Server Name, Server

IP, and Netmask, as needed.

3. Select Enable or Disable, for DHCP,

depending on whether or not you are

using a DHCP server.

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 168 169

Pas de commentaire

Moxa Technologies NPort Server Pro Manuel d'utilisateur Page 61