Moxa Technologies DA-710 Series Manuel d'utilisateur télécharger pdf (Page 29)

DA-710 Series HW User’s Manual Hardware Installation

Connecting USB Devices

The DA-710 embedded computer has four USB 2.0 ports on the rear panel. All of the ports are

UHCI, Rev 2.0 compliant and support Plug & Play and hot swapping. These ports can be used to

connect USB devices, such as a keyboard, mouse, USB flash disk, and USB CD-ROM. In addition,

both USB ports support system boot up, which can be activated by modifying the BIOS settings.

The chapter “BIOS Setup” describes the configuration process in detail.

USB 2.0

Host x 4

Gigabit LAN Ports

The DA-710 has 4 Gigabit LAN ports. When the cable is properly connected, the LEDs on the

RJ45 connectors will glow to indicate a proper connection.

10/100/1000

Ethernet Port x 4

Pin 10/100 Mbps 1000 Mbps

ETx+ TRD(0)+

ETx- TRD(0)-

ERx+ TRD(1)+

--- TRD(2)+

--- TRD(2)-

ERx- TRD(1)-

--- TRD(3)+

--- TRD(3)-

2-16

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 55 56

Pas de commentaire

Moxa Technologies DA-710 Series Manuel d'utilisateur Page 29