Moxa Technologies V2401 Manuel d'utilisateur télécharger pdf (Page 41)

MC-4510-C23 HW User’s Manual BIOS Setup

4-14

6. Make sure the first boot device is Hard Disk. If it isn’t, press Enter to change it.

7. Select Exit Æ Save & Exit Setup and then press Enter.

8. Choose Y to save to the CMOS and then exit.

Step 4: Run awdflash.exe to upgrade the BIOS.

1. While in the BIOS Setup menu and before upgrading the BIOS, you may choose to save the

old BIOS files to a specific location. Type Y to do so, or N to begin the upgrade.

2. If the BIOS Setup is correct, it will restart and boot from the USB disk.

3. Run awdflash 451010.s02 from the command line to upgrade the BIOS. Replace

xxxxxxx.Sxx with the BIOS binary file name discussed in Step 2.

4. Press F1 to reset the system after the bios update is complete. The system should reboot at this

time.

1 2 ... 36 37 38 39 40 41 42 43

Pas de commentaire

Moxa Technologies V2401 Manuel d'utilisateur Page 41