Moxa Technologies Industio CP-114 Series CP-114 Series Manuel d'utilisateur télécharger pdf (Page 76)

Universal PCI Board User’s Manual Driver Installation: Windows NT

6-3

Installing the Driver

You will need to plug the board in an available PCI or PCI-X slot first, before installing the driver.

Note that these instructions use the CP-168U V2 as an example. The procedure for installing all

models is the same.

1. Log into Windows NT as Administrator.

2. Locate the appropriate folder for your board’s drivers on the Document & Software CD. The

NT drivers will be located under the product folder in the \Software\WinNT directory (e.g.,

under \CP-118U Series\Software). Copy this folder to the PC’s hard disk and remember its

location.

3. In the Control Panel, open Network applet. On the Adapters tab, click Add. When prompted

to select a product, click Have Disk…

You will be prompted to enter the path to the driver. Enter the location of the drivers that you

copied from the Document & Software CD (C:\Windows.nt in this example) and then click

OK.

1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 135 136

Pas de commentaire

Moxa Technologies Industio CP-114 Series CP-114 Series Manuel d'utilisateur Page 76