Moxa Technologies Industio CP-114 Series CP-114 Series Manuel d'utilisateur télécharger pdf (Page 31)

Software Installation

Industio CP-114 User's Manual 3-15

box, you may have two ways to map the physical ports to COM numbers depending on the

check box “Auto Enumerating COM Number”.

If “Auto Enumerating COM Number” is checked and specify the COM number of the first

port, subsequent ports are mapped to continuous COM numbers. For instance, if first port is

mapped to COM3, then second port is mapped to COM4 sequentially.

If “Auto Enumerating COM Number” is not checked, specify the COM number for

individual port. For instance, the second port can be out of sequence, say COM10, while the

first port is mapped to COM3.

l Rx FIFO Trigger

Rx FIFO trigger levels, at 1, 4, 8 or 14 bytes, are available, and the default value is 14 bytes.

l Tx FIFO Size

Tx FIFO sizes from 1 to 16 bytes are available, and the default value is 16 bytes.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 69 70

Pas de commentaire

Moxa Technologies Industio CP-114 Series CP-114 Series Manuel d'utilisateur Page 31