Moxa Technologies UC-7110 Manuel d'utilisateur télécharger pdf (Page 11)

UC-7101/7110/7112 Software User’s Manual Getting Started

Telnet

If you know at least one of the two IP

addresses and netmasks, then you can use

Telnet to connect to the

UC-7101/7110/7112’s console.

Default IP Address Default Netmask

LAN 1

192.168.3.127 255.255.255.0

LAN 2

192.168.4.127 255.255.255.0

Telnet can be used locally by using a crossover Ethernet cable to connect your computer to the

UC-7101/7110/7112, or over a LAN or the Internet. The default IP addresses and netmasks are

shown above. To login, type the Login name and password as requested. The defaults are:

Password: root

Once you open the “msh command shell” you can proceed to configure the UC-7101/7110/7112’s

network settings, as described in the next section.

ATTENTION

y Serial Console Reminder: Remember to choose VT100 as the terminal type. Use the cable

CBL-RJ45F9-150 that comes with the UC-7101/7110/7112 to connect to the serial console

port. If you are not able to connect on the first try, unplug and then re-plug the

UC-7101/7110/7112’s power cord.

y Telnet Reminder: When connecting to the UC-7101/7110/7112 over a LAN, configure your

PC’s Ethernet card to be on the same subnet as the UC-7101/7110/7112 you wish to contact.

2-3

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 45 46

Pas de commentaire

Moxa Technologies UC-7110 Manuel d'utilisateur Page 11