Moxa Technologies NE-4100 Guide de l'utilisateur télécharger pdf (Page 12)

NE-4100 Series Serial Command Mode User’s Guide

Page 9

3. Once the NE-4100-CMD is located, click on the product’s Model to highlight it, and then

click the right mouse button. Select the Configuration option.

4. Check the Modify box to change the configuration. If the Enable box is not checked, then

Serial Command Mode is disabled. There are two Enable options:

HW Trigger

SW Trigger

Select H/W Control Pin (Use DIO 0)

to tri

er Command Mode b

hardware.

Select Activated by Character to

trigger Command Mode by software. In

this case, you will also need to enter the

three characters (in HEX format) that

will be used as the trigger characters.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 24 25

Pas de commentaire

Moxa Technologies NE-4100 Guide de l'utilisateur Page 12