Moxa Technologies EDS-516A Series Manuel d'utilisateur télécharger pdf (Page 38)

EDS-516A Series User’s Manual Featured Functions

3-23

Configuring “Turbo Ring” and “Turbo Ring V2”

Use the Communication Redundancy page to configure select “Turbo Ring” or “Turbo Ring

V2.” Note that configuration pages for these two protocols are different.

Configuring “Turbo Ring”

Explanation of “Current Status” Items

Now Active

Shows which communication protocol is in use: Turbo Ring, Turbo Ring V2, RSTP, or none.

Master/Slave

Indicates whether or not this EDS-516A is the Master of the Turbo Ring. (This field appears only

when selected to operate in Turbo Ring or Turbo Ring V2 mode.)

NOTE

The user does not need to set the master to use Turbo Ring. If no master is set, the Turbo Ring

protocol will assign master status to one of the EDS-516A units in the ring. The master is only

used to determine which segment serves as the backup path.

Redundant Ports Status (1st Port, 2nd Port)

Ring Coupling Ports Status (Coupling Port, Coupling Control Port)

The “Ports Status” indicators show Forwarding for normal transmission, Blocking if this port is

connected to a backup path and the path is blocked, and Link down if there is no connection.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 97 98

Pas de commentaire

Moxa Technologies EDS-516A Series Manuel d'utilisateur Page 38