Moxa Technologies Switch EDS-508 Manuel d'utilisateur télécharger pdf (Page 26)

MOXA EtherDevice Switch Hardware Installation Guide

NOTE 1. The pin numbers for male DB9 and DB25 connectors, and

hole numbers for female DB9 and DB25 connectors are

labeled on the connector. However, the numbers are

typically quite small, so you may need to use a magnifying

glass to see the numbers clearly.

2. The pin numbers for both 8-pin and 10-pin RJ45

connectors (and ports) are typically not labeled on the

connector (or port). Refer to the Pinout and Cable Wiring

diagrams below to see how RJ45 pins are numbered.

RS-232 Connection

MOXA EDS-508 has one RS-232 (10-pin RJ45) console port, located on

the top panel. Use either an RJ45-to-DB9 or RJ45-to-DB25 cable (see the

cable wiring diagrams below) to connect MOXA EDS-508’s console port

to your PC’s COM port. You may then use a console terminal program,

such as MOXA PComm Terminal Emulator, to access MOXA EDS-508’s

console configuration utility.

RJ45 (10-pin) Console Port Pinouts

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 45 46

Pas de commentaire

Moxa Technologies Switch EDS-508 Manuel d'utilisateur Page 26