Moxa Technologies C104H/PCI Series Manuel d'utilisateur télécharger pdf (Page 12)

Chapter 2 l l Hardware Installation

2.2 Connecting the Fan-out Cable

Step 7: Connect the connection cable.

P1 P2

P3 P4

Smartio

C104 PCI Series

Step 8: Power on the PC and the BIOS will automatically set the IRQ and I/O address.

Note ! Each board must occupy one unique IRQ and four 8-byte I/O

addresses, which are assigned automatically by the PCI BIOS.

However, you can select a free IRQ number manually via the PC’s

BIOS setup for the PCI slot, but normally this method is not available

for the I/O address. The possible IRQ numbers are 2, 3, 4, 5, 7, 10, 11,

12, and 15. The possible I/O addresses are from 0x0000 to 0xFFFF.

Step 9: Proceed with the software installation detailed in the next chapter, “Software

Installation”.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 47 48

Pas de commentaire

Moxa Technologies C104H/PCI Series Manuel d'utilisateur Page 12