Moxa Technologies CP-168U Manuel d'utilisateur télécharger pdf (Page 34)

4. Check the Auto Enumerating COM Name check-box to assign continuous COM

numbers for subsequent ports. For example, if COM3 is assigned to Port 1, then COM4

will be automatically assigned to Port 2.

5. Re-assign the Rx FIFO Trigger by selecting a number from the pull-down list. Check

the Set the change to all ports check-box to apply this setting to all ports. Rx FIFO

trigger levels from 1 to 62 bytes are available, with a default value of 56 bytes.

6. Re-assign the Tx FIFO Size by selecting a number from the pull-down list. Check the

Set the change to all ports check-box to apply this setting to all ports. Tx FIFO sizes

from 1 to 64 bytes are available, with a default value of 64 bytes.

7. To complete the update, click [OK] in the Port X dialog box, click [OK] in the CP-

168U board Properties dialog box, and then click [OK] on the Device Manager tab.

8. Restart the system to activate the latest configuration.

Updating the Driver

This section shows how to update the Windows 95/98 driver.

Smartio CP-168U User’s Manual

3-18

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 62 63

Pas de commentaire

Moxa Technologies CP-168U Manuel d'utilisateur Page 34