Moxa-technologies NPort 5110 Series Manuel d'utilisateur télécharger pdf (Page 32)

NPort 5110 Series User’s Manual Web Console Configuration

5-10

Operating Settings

Click on Operating Settings, located under Main Menu, to display the operating settings for both

of NPort 5110’s serial ports.

Real COM Mode

TCP alive check time

Setting Factory Default Necessity

0 to 99 min 7 min Optional

0 min: TCP connection is not closed due to an idle TCP connection.

1 to 99 min: NPort 5110 automatically closes the TCP connection if there is no TCP activity for

the given time. After the connection is closed, NPort 5110 starts listening for another Real COM

driver connection from another host.

Max connection

Setting Factory Default Necessity

1, 2, 3, 4 1 Required

Max connection is usually used when the user needs to receive data from different hosts

simultaneously. The factory default is 1. In this case, only one specific host can access this port of

the NPort 5110, and the Real COM driver on that host will have full control over the port.

Max. connection 1:

Allows only 1 host’s Real COM driver to open the specific NPort 5110 serial port.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 100 101

Pas de commentaire

Moxa-technologies NPort 5110 Series Manuel d'utilisateur Page 32