Moxa-technologies Moxa Smartio C168H Manuel d'utilisateur télécharger pdf (Page 4)

About This Manual

This manual is composed of six Chapters and one Appendix. This manual is written for installer, system

administrator and software programmer.

If you are a first-time installer and system administrator, we recommend you to go through the whole

manual except Chapter 4 “Serial Programming Tools”.

If you are a software programmer, you may refer to Chapter 4 “Serial Programming Tools”.

If you need cable wiring information, please see Chapter 5 “Connection Option (Opt8x) and Cable

Wiring”.

If you encounter any problem during installation, please refer to Chapter 6 “Troubleshooting”.

Chapter 1 Introduction

This chapter gives the overview and features for C168H/PCI. Check-list and overall installation guide are

also included.

Chapter 2 Hardware Installation

This chapter gives details of how to do hardware installation for C168H/PCI and connection option

(Opt8x).

Chapter 3 Software Installation

This Chapter describes the software installation, board and ports configuration, driver update and

removal for various operating systems: Windows NT, and Windows 95/98.

Chapter 4 Serial Programming Tools

This Chapter roughly describes the programming tools for various O.S. platforms, including PComm Lite

under Windows NT and Windows 95/98. Also, RS-485 programming issue is discussed (for Opt8J).

Chapter 5 Connection Option (Opt8x) and Cable Wiring

This Chapter describes the RS-232/422/485 cable wiring for each connection option (Opt8x).

Chapter 6 Troubleshooting

This Chapter describes error might happen and possible solutions for C168H/PCI.

Appendix Technical Reference

This chapter describes specification, PCI, UART, and DB62 pinouts.

1 2 3 4 5 6 7 8 9 ... 73 74

Pas de commentaire

Moxa-technologies Moxa Smartio C168H Manuel d'utilisateur Page 4