Moxa-technologies CP-104UL Manuel d'utilisateur télécharger pdf (Page 29)

Software Installation

Smartio CP-104UL User’s Manual 3-15

added, the system will prompt you to take care of port configuration, which is discussed in this

section.

1. Click on a specific port from the CP-168U Series Installation window, and then click on [Port

Setting] to open the Port X dialog box.

2. Select a COM number for the port from the Port Number pull-down list.

3. Check the Auto Enumerating COM Number check-box to have subsequent ports mapped to

continuous COM numbers. For example, if COM 3 is assigned to Port 1, then COM 4 will be

automatically assigned to Port 2.

4. Select an Rx FIFO Trigger from the Rx FIFO Level pull-down list. Rx FIFO trigger levels from

High to Low are available, with a default value is High Level (120 bytes). Check Set the change

to all ports check-box to apply the just defined Rx FIFO Trigger to all ports.

5. Select a Tx FIFO Size from the Tx FIFO Level pull-down list. Tx FIFO Level from High to

Low are available, with a default value is High Level (128 bytes). Check Set the change to all

ports check-box to apply the just defined Tx FIFO Size to all ports.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 68 69

Pas de commentaire

Moxa-technologies CP-104UL Manuel d'utilisateur Page 29