Moxa Technologies Managed Ethernet Switch/Extender Manuel d'utilisateur télécharger pdf (Page 7)

Moxa Managed DSL Ethernet Extender Getting Started

2-3

3. The Property window should open. On the Communication Parameter tab for Ports, select the COM

port that is being used for the console connection. Set the other fields as follows: 115200 for Baud Rate,

8 for Data Bits, None for Parity, and 1 for Stop Bits.

4. On the Terminal tab, select VT100 for Terminal Type, and then click OK to continue.

5. In the terminal window, the Moxa DSL Ethernet extender will prompt you to select a terminal type. Enter 1

to select ansi/vt100 and then press Enter.

1 2 3 4 5 6 7 8 9 10 11 12 ... 42 43

Pas de commentaire

Moxa Technologies Managed Ethernet Switch/Extender Manuel d'utilisateur Page 7