Moxa Technologies NPort Server Pro Manuel d'utilisateur télécharger pdf (Page 13)

“display only” are not enclosed.

8. Since our goal in this section is to set the IP address of the server,

use the keyboard arrow keys to position the cursor over the first

digit of the IP address. Type in the correct IP address and then

press Enter to accept this value.

9. Press ESC to return to the main menu, and then select Restart to

activate the change.

Direct Console

You may also use NPort Express’s RS-232 Console function to set up

the IP address. We suggest using MOXA PComm Terminal Emulator

to carry out the installation procedure.

1. You must first set the DIP switches located on NPort Express’s

front panel. Set SW1 to ON, SW2 to OFF, and SW3 to OFF.

2. Either plug NPort Express’s female serial port jack directly into

your computer’s male DB9 RS-232 serial port, or use an appro-

priate converter.

3. From the Windows 98 desktop click on Start à Programs à

PComm Lite à Terminal Emulator.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 90 91

Pas de commentaire

Moxa Technologies NPort Server Pro Manuel d'utilisateur Page 13